Headlight Headlight Assembly For 2011-2013 Left+Right Headlight New

Product Overview

Fitment? For Kia Optima EX 2. 0L 2011-2013For Kia Optima EX 2. 4L 2011-2013For Kia Optima LX 2. 4L 2011-2013For Kia Optima SX 2. 0L 2011-2013For Kia Optima SXL 2.

0L 2013Product DescriptionSeamless replacement - this headlight/" class="text-primary hover:underline">headlight assembly was specifically designed to look and function like the original headlight/" class="text-primary hover:underline">headlight on specific vehiclesExcellent value - original equipment quality at a lower priceDurable materials - rigid plastic protects against weather and road conditionsEasy installation - built to match the exact original dimensions for proper fitBefore you begin to adjust the light, make sure check the alignment of your lights first.

Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3. 5 feet above the ground. 1. Undo the screws, clips, or retainer springs that hold the headlight/" class="text-primary hover:underline">headlight in place. 2. Disconnect the wiring from the assembly. 3.

Detach the headlight/" class="text-primary hover:underline">headlight from the vehicle to replace it with a new one. 4. Fit in the new headlight/" class="text-primary hover:underline">headlight assembly. 5. Fix the new headlight/" class="text-primary hover:underline">headlight into place and make sure that the screws, clips, or retainer springs are sealed. 6. Reconnect the wiring that was unplugged from the assembly. 7.

Put back the grille/" class="text-primary hover:underline">grille and other components that you removed. Seal them back into place. 8. Test the new assembly.

TipsCondensation DOES NOT Mean A Product ProblemIt's normal that the condensation appears inside the headlights because of temperature differences, air pressure, etc, thus it does not mean headlight/" class="text-primary hover:underline">headlight malfunction. How to Remove Temporary CondensationWay 1.

Check if the vents are blocked and switch on the low beam light for about 20 minsWay 2. Take the headlight/" class="text-primary hover:underline">headlight bulb out and drive out moisturWay 3. Put a silica gel packet in the housing to soak up moisture