Brake Caliper 1x Rear Left Brake Calipers For 1981-83 84 85 T-Type 2-Door

Product Overview

Vehicle Information Fitment:1983-85 Buick Riviera Base Convertible 2-Door1979-82 & 84 Buick Riviera Base Coupe 2-Door1982 Buick Riviera Limited Edition Convertible 2-Door1983-85 Buick Riviera Luxury Coupe 2-Door1979-80 Buick Riviera S Coupe 2-Door1981-85 Buick Riviera T-Type Coupe 2-Door1983 Buick Riviera XX Anniversary Edition Coupe 2-Door1979-85 Cadillac Eldorado Base Coupe 2-Door1984-85 Cadillac Eldorado Biarritz Convertible 2-Door1979-83 Cadillac Eldorado Biarritz Coupe 2-Door1981 Cadillac Eldorado Brougham d'Elegance Coupe 2-Door1979-85 Cadillac Eldorado Cabriolet Coupe 2-Door1982-85 Cadillac Eldorado Touring Coupe 2-Door1980-85 Cadillac Seville Base Sedan 4-Door1980-85 Cadillac Seville Elegante Sedan 4-Door1979-85 Oldsmobile Toronado Brougham Coupe 2-Door1985 Oldsmobile Toronado Caliente Coupe 2-Door1980-81 Oldsmobile Toronado XSC Coupe 2-Door1979 Oldsmobile Toronado XSR Coupe 2-DoorPackage Include:1Piece Brake CalipersSteps to replace a brake Caliper:If you are comfortable with car repairs and have the necessary tools, you can replace the brake caliper yourself.

The process might vary slightly for different makes and models. Here are the general steps to replace a brake caliper. 1. Lift the vehicleUse the lug wrench to loosen the lug nuts on the tire and then use the jack to lift the vehicle off the ground. Secure the vehicle with jack stands. 2.

Remove the tireUse the lug wrench to remove the lug nuts and then remove the tire from the vehicle. 3. Remove the caliper mounting boltsUse the brake caliper tool to remove the caliper mounting bolts that hold the caliper in place. 4.

Remove the caliperOnce the mounting bolts are removed, gently pry the caliper off the brake rotor. Be careful not to damage the brake hose as you remove the caliper. 5. Install the new caliperPlace the new caliper over the brake rotor and secure it in place with the caliper mounting bolts.

Torque the bolts to the manufacturer’s recommended specifications using a torque wrench. 6. Install the tireReplace the tire and lug nuts, torque to spec, and then lower the vehicle off the jack stands. 7. Bleed the brake systemUse a brake bleeding kit to remove any air from the brake system.

This is an important step to ensure that the brakes are working properly. Continually top up the fluid in the reservoir as you bleed the brakes. 8. Test the brakesOnce the brake caliper is installed and the brake system has been bled, test the brakes to ensure they are functioning properly